Veel werkzaamheden brengen bijzondere risico's met zich mee die het dragen van geschikte werkkleding en persoonlijke beschermingsmiddelen (PBM's) noodzakelijk maken. Persoonlijke beschermingsmiddelen (PBM) kenmerken zich door zijn bijzondere beschermende functie tegen één of meerdere risico's, het dient ter bescherming van de gebruiker en voorkomt de verspreiding van besmetting via de persoon of kleding.
We testen onder andere adembescherming tegen zowel vaste als vloeibare aerosolen. Filtermaskers (FFP2), ook wel wegwerpmaskers genoemd, volgens de EN 149: 2001 + A1: 2009 de maskers zijn onderworpen aan verschillende wettelijke normen over de hele wereld. Het testen van beschermende kleding tegen infectieuze agentia. De Europese norm (EN 14126) specificeert minimumeisen en testmethoden voor herbruikbare kleding.
Er zijn nog veel meer testen waarvoor u bij ons terecht kunt denk aan:
| Maskers sreening | |
| Surgical Mask Standard screening only filtration, Type I en II | EN 14683:2019 5.2.2 screening |
| Surgical Mask Standard screening only filtration and pressure, Type I en II | EN 14683:2019 5.2.2/3 screening |
| Surgical Mask Standard screening only filtration, pressure and splash, Type IIR | EN 14683:2019 5.2.2/3/4 screening |
| Covid-19 - FFP2 Masker screening Paraffinoil or NaCl | EN 149 sreening |
| Covid-19 - FFP2 Masker screening Paraffinoil and NaCl | EN 149 sreening |
| Covid-19 - FFP2 Masker screening (juni versie) spoed Paraffinoil of NaCl | EN 149 sreening |
| Covid-19 - FFP2 Masker screening (juni versie) spoed Paraffinoil en NaCl | EN 149 sreening |
| Covid-19 - only penetration screening Paraffinoil | EN 149 sreening |
| Covid-19 - only penetration screening NaCl | EN 149 sreening |
| Eye-protectors | |
| Requirements for various types of personal eye-protectors | EN 166 |
| FFP1-2-3 mask | |
| FFP2 Masker full test 6-8 maanden | EN 149 |
| Testen FFP1-2-3 Masker without falve, full test 3-4 maanden. | EN 149 |
| Testen FFP1-2-3 Masker with valve, full test 3-4 maanden. | EN 149 |
| Certifceren can FFP1-2-3 maskers, | EN 149 |
| Surgical Mask | |
| Surgical Mask Standard. Minimum Performance Requirements According to the New Facemask Standard | EN 14683:2019 |
| Bacterial filtration | EN 14683:2019 5.2.2 |
| Pressure difference | EN 14683:2019 5.2.3 |
| Splash test | EN 14683:2019 5.2.4 |
| Bioburden | EN 14683:2019 5.2.5 |
| Cytotoxity | EN 14683:2019 5.2.6 |
| Medical Face Masks (US) | ASTM F2100 |
| Community/General Use Masks, Face Coverings, Gaiters, and Bandanas | |
| Community/General Use Masks, | AATCC M14 |
| Community/General Use Masks, | CWA 17553 |
| Community/General Use Masks, | AFNOR S76-001 |
| Beschermende handschoenen | |
| Eisen en beproevingsmethoden voor de afwezigheid van gaten (Waterdoorlaatbaarheid) | EN 455-1 |
| Eisen en beproeving voor fysische eigenschappen (Lengte, breedte metingen en Treksterkte) | EN 455-2 |
| Eisen en beproevingsmethoden voor de biologische evaluatie Endotoxin content | EN 455-3 |
| Eisen en beproevingsmethoden voor de biologische evaluatie Soluble protein content (lowry) | EN 455-3 |
| Eisen en beproevingsmethoden voor levensduur bij opslag (Verouderings Proef) | EN 455-4 |
| Eisen en beproevingsmethoden voor de afwezigheid van gaten (Waterdoorlaatbaarheid) | EN 455-1 |
| Eisen en beproeving voor fysische eigenschappen (Lengte en breedte metingen handshoenen) | EN 455-2 |
| Eisen en beproevingsmethoden voor de biologische evaluatie Soluble protein content (lowry) | EN 455-3 |
| Eisen en beproevingsmethoden voor de biologische evaluatie. Powder content EN ISO 21171 | EN 455-3 |
| Bepaling van de materiële weerstand van permeatie door chemicaliën. Prijs per chem. Vanaf | EN 16523-1 |
| Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs | ASTM D6978 |
| EN 14126 Beschermende kleding tegen Micro-organismen | EN 14126 zonder 4.2 4.3 en 5 |
| Wet penetration (4.1) | ISO 22610 |
| Resistance to Contaminated Aersol (4.1) | ISO 22611 |
| Dry penetration (4.1) | ISO 22612 |
| Protection against blood en body fluids (4.1) | ISO 16604 |
| Protection against virus (4.1) | ISO 16603 |
| Performance Requirements for seams, joins and assemlabes (4.2) | EN 14325 (&5.5) |
| Whole suit requirements (4.3) | EN 340 (See table 5, EN14126) |
| Whole suit requirements (4.3) type 1a, 1b, 1c, 2 | EN 943-1 (EN943-2 for emergency terams) (See table 5, EN14126) |
| Whole suit requirements (4.3) type 3 | EN 14605 (EN 466-1) (See table 5, EN14126) |
| Whole suit requirements (4.3) type 4 | EN 14605 (EN 465) (See table 5, EN14126) |
| Whole suit requirements (4.3) type 5 | ISO 13982-1 (See table 5, EN14126) |
| Whole suit requirements (4.3) type 6 | EN 13034 (See table 5, EN14126) |
| Whole suit requirements (4.3) partial body protection | EN 467 (See table 5, EN14126) |
| Marking (5) | EN14126 paragraaf 5 |
| EN 13795-1 OK textiel vochtige omgeving, Surgical clothing and drapes: Surgical drapes an gowns | |
| Wet penetration | ISO 22610 |
| Dry penetration | ISO 22612 |
| Determination of a population of microorganisms on products | EN 11737-1 |
| Cytotoxcity test | EN 10993-5 |
| Cleanlines/purity particular material | EN 9073-10 |
| Resistance to water | EN 20811 ISO 811 |
| Bursting strength Dry and Wet | EN, ISO 13938-1 |
| Tensile strength Dry and Wet | EN 29073-3, ISO 9073-3 |
| EN 13795-2 OK textiel, Surgical clothing and drapes: clean air suits | |
| Dry penetration | ISO 22612 |
| Determination of a population of microorganisms on products | EN 11737-1 |
| Cytotoxcity test | EN 10993-5 |
| Cleanlines/purity particular material | EN 9073-10 |
| Bursting strength Dry | EN, ISO 13938-1 |
| Tensile strength Dry | EN 29073-3, ISO 9073-3 |
| Medische kleding | |
| Cleanliness particulate Linting | EN, ISO 9073-10 |
| Primary ignition and penetration by laserbeam | EN, ISO 11810-1 |
| Veiligheid voor Kinderkleding | |
| Textiel en textielprodukten deel 1 Veiligheid van kinderkleding | EN 17394-1 |
| Textiel en textielprodukten deel 1 Veiligheid van bevestiging van knopen | EN 17394-2 |
| Textiel en textielprodukten deel 1 Veiligheid van mechanisch aangebraschte metalen drukknopen | EN 17394-3 |
| Textiel en textielprodukten deel 1 Veiligheid van de bevestiging van componenten uitgezonderd knopen en drukknopen | EN 17394-4 |
| Microbiologisch onderzoek op textiel en non wovens (**) | |
| Linting tendency nonwovens | EDANA 300.0-84 |
| Protective clothing to penetration by different fluids | ISO 16603 |
| Water absorption | ISO 9073-6 |
| Determination of runn-off | ISO 9073-11 |
| Tests for antimicrobial efficacy | JIS Z 2801 |
| Tests for antimicrobial efficacy | JIS L 1902 |
| Linting wet onderdeel van EN14126, 13795-1, 13795-2 | EN 1644 |
| Protection against blood en body fluids onderdeel van DIN EN 14126 | ISO 16604 |
| Firefighters | |
| Firefighter’s protective clothing | EN 469 |
| Reflective clothing for specialized fire-fighting | EN 1486 |
| Beschermende kleding Brandweer | ISO 11613 |
| Firefighter’s hoods | EN 13911 |
| Firefighter’s gloves | EN 659 |
| Wildland firefighting clothing | EN15416, ISO15384, ISO16073 |
| Heat and Flame Protection | |
| Protective Clothing against heat and flame | EN 11612 (EN 531) |
| Welder’s protective clothing | EN 11611 (EN 470-1) |
| Limited flame spread protective clothing | EN 14116 (EN 533) |
| Limited flame spread protective clothinge | EN 14116 (EN 533) (na schoonmaken) |
| Protective gloves against heat and flame | EN 407 |
| Welder’s protective gloves | EN 12477 |
| Public order (police) protective clothing | BS 7971-10 |
| Protective clothing for racing drivers | EN 14460 |
| Protective Clothing against electric arc flash | IEC 61482 |
| Visibility | |
| High Visibility clothing for professional use (PPE risk II) | EN 20471 (EN 471) |
| Visibility clothing for non-professional use (PPE risk II) | EN 1150 |
| High Visibility Safety Garments (Australia/New Zealand) | AS/NZS 4602.1-2011 |
| High Visibility Materials for Safety Garments (Australia/New Zealand) | AS/NZS 1906.4-2010 |
| High Visibility Safety Apparel and Headwear (USA) | AS/NZS 1906.4-2010 |
| Chemical Protection | |
| "Gas-tight" (Type 1) and "non-gas-tight" (Type 2) protective suits | EN 943-1 |
| "Gas-tight" (Type 1) and "non-gas-tight" (Type 2) protective suits | EN 943-2 |
| Limited protective performance against liquid chemicals (Type 6) | EN 13034 |
| Protective clothing against solid particulates (Type 5) | EN 13982-1 |
| Liquid-tight (Type 3) or spray-tight (Type 4) protective clothing | EN 14605 (was EN467, EN466, EN465 ) |
| Protective clothing against radioactive contamination | EN 1073-1 |
| Protective clothing against radioactive contamination | EN 1073-2 |
| Protective clothing against infective agents | EN 14126 |
| Protective gloves against chemicals and micro-organisms | EN 374-1 |
| Protective gloves against chemicals and micro-organisms | EN 374-2 |
| Protective gloves against chemicals and micro-organisms | EN 374-3 is vervangen door de EN16523-1 |
| Protective gloves against chemicals and micro-organisms | EN 374-4 |
| Resistance to permeation by chemicals. Permeation by potentially hazardous liquid chemicals under conditions of continuous contact. | EN 16523-1 |
| Resistance to permeation by chemicals. Permeation by potentially hazardous liquid chemicals under conditions of continuous contact. Prijs per chem. | EN 16523-1 |
| Resistance to permeation by chemicals | EN ISO 6529 |
| Meerkosten EN ISO 6529 Cumulative permeation mass at BT1.0 (μg/cm2) 4 AND/OR Normalised time to reach 20, 75, 150 μg/cm2 (minutes) Extra per chemical/per sample | EN ISO 6529 |
| Meerkosten EN ISO 6529 Permeation graphs – permeation rate vs time Extra per chemical/per sample | EN ISO 6529 |
| Dichloromethane, L/OL 75-09-2 | EN ISO 6529 |
| Methanol, ≥99% L/OL 67-56-1 | EN ISO 6529 |
| n-Hexane, ≥95% L/OL 110-54-3 | EN ISO 6529 |
| Toluene, ≥99% L/OL 108-88-3 | EN ISO 6529 |
| Diethylamine, ≥99% L/OL 109-89-7 | EN ISO 6529 |
| Ammonia Gas, ≥99% G/OL 7664-41-7 | EN ISO 6529 |
| Chlorine Gas, ≥99% G/CL 7782-50-5 | EN ISO 6529 |
| Hydrogen Chloride Gas, ≥99% G/CL 7647-01-0 | EN ISO 6529 |
| Acetone, ≥99% L/OL 67-64-1 | EN ISO 6529 |
| Ethyl Acetate, ≥99% L/OL 141-78-6 | EN ISO 6529 |
| Carbon Disulphide, ≥99% L/OL 75-15-0 | EN ISO 6529 |
| Tetrahydrofuran, ≥99% L/OL 109-99-9 | EN ISO 6529 |
| Sodium hydroxide, 40% w/v L /CL 1310-73-2 | EN ISO 6529 |
| Sulphuric acid, 96% L /CL 7664-93-9 | EN ISO 6529 |
| Hydrofluoric acid (40-50%) | EN ISO 6529 |
| Benzene | EN ISO 6529 |
| Formaldehyde | EN ISO 6529 |
| Various alcohols | EN ISO 6529 |
| Mechanical Action | |
| Protective clothing and gloves for users of hand-held chain saws | EN 381 series |
| Protective clothing for avoidance of entanglement | EN 510 |
| Protective gloves against mechanical risks | EN 388 |
| Protective gloves against mechanical risks. Abrasion resistance per laag. | EN 388 6.1 |
| Protective gloves against mechanical risks. Blate cut resistrance Abrasion resistance. | EN 388 6.2 |
| Protective gloves against mechanical risks. Blate cut resistrance Abrasion resistance. | EN 388 6.3 ISO 13997 |
| Protective gloves against mechanical risks. Tear resistance per laag. | EN 388 6.4 |
| Protective gloves against mechanical risks. Puncture resistance. | EN 388 6.5 |
| Protective gloves against mechanical risks. Impact. | EN 388 6.6 ISO 13954:2015 |
| Knee protectors | EN 14404 |
| Hand Protection Selection Criteria | ANSI/ISEA 105 - 2011 |
| Protective Gloves for Professional Motorcycle Riders | BS EN 13594:2015 |
| Foul Weather and Cold Environments | |
| Clothing for protection against rain (PPE risk I) | EN 343 |
| Clothing for protection against cool environments | EN 14058 |
| Clothing for protection against cold | EN 342 |
| Protective gloves against cold | EN 511 |
| Laser Protection | |
| Functional requirements and a product labelling applicable to temporary and permanent passive guards (in the following called screens) for protection against laser radiation. | EN 12254 |
| Radiation Protection | |
| Protective gloves against ionizing radiation and radioactive contamination | EN 421 |
| X-ray protection | EN / IEC 61331-1 |
| General Requirements | |
| Protective clothing | EN 13688 (EN 340) |
| Protective gloves (glove design and construction, innocuousness, comfort and efficiency) | EN 21420 (EN 420) |
| Protective gloves Sizing and measurement of gloves/ Measurement of glove length (prijs per maat) | EN 21420 (EN 420) 6.1 |
| Protective gloves Dexterity/ Determining gloved finger dexterity | EN 21420 (EN 420) 6.2 |
| Protective gloves Water vapour permeability (Leather) ISO 14628 | EN 21420 (EN 420) 6.3.1 |
| Protective gloves Water vapour absortion (Leather) ISO 20344 | EN 21420 (EN 420) 6.4 |
| Protective gloves Water vapour resistance (Textile materials) ISO 11092 | EN 21420 (EN 420) 6.3.2 |
| Oven gloves (consumer) No washing, Clauses 4.2 Materials & 4.4 Dimensions, Determination of pH (skin irritation), Contact Heat @ 250°C (ISO 12127-1) | BS 6526 |
| Oven gloves (consumer) 5* washing EN 407, Clauses 4.2 Materials & 4.4 Dimensions, Determination of pH (skin irritation), 2* Contact Heat @ 250°C (ISO 12127-1) | BS 6526 |
| Safety Footwear | |
| General Test Method | EN ISO 20344:2011 |
| Safety Footwear | EN ISO 20345:2011 |
| Protective Footwear | EN ISO 20346:2014 |
| Occupational Footwear | EN ISO 20347:2012 |
| Safety Footwear Thermal risk & Welding | |
| Against Molten Metal Splash | EN ISO 20349:2010 |
| Safety Footwear Firefighters | |
| Footwear for Firefighters | EN 15090:2012 |
| Safety Footwear Electrostatic Properties | |
| Electrostatic Properties | EN 61340-4-3:2002 |
| Low Voltage Installations | EN 50321:2000 |
| Safety Footwear Chemical Risks | |
| Footwear Protecting Against Chemicals | EN 13832-2:2006 |
| Safety Footwear Chemical Risks | |
| Protective Footwear Motorcycle | EN 13634:2010 |
| Shin Guards | |
| Shin Guards for Association Football Players (EU) | EN 13061:2009 |
| Soccer Shin Guards (USA) | NOCSAE DOC(ND) 090-06m15 |
| Baby/Nursery | |
| Baby carriers (excl chemisch test en brandtest) | EN 13209-2 |
| Baby carriers (Alleen brandtest volgens de EN71-2) definietieve prijs na ontvangst monster. | EN 13209-2 |
| Baby carriers (Alleen chemisch test volgense EN71-3 ) definietieve prijs na ontvangst monster. | EN 13209-2 |
| Reclined Cradles | EN 12790 |
| Changing Units | EN 12221 |
| Playpens | EN 12227 |
| Wheeled Child Conveyances | EN 1888 |
| Safety Barriers | EN 1930 |
| Carry Cots and Stands | EN 1466 |
| Cots and Travel Cots | EN 716 |
| Bedguards | BS 7929 |
| Cot Bumpers | BS 1877-10 |
| Guidelines for the safety of children’s slings. | PD CEN / TR 16512: 2015 |
| Diverse | |
| Beschermende kleding voor plant bestrijdings middelen | DIN EN 14786 |
| Beschermende kleding Medisch | BS EN 6249 |
| Beschermende kleding against thermal hazards of an electric arc | EN 61482 |
| Beschermende kleding | BS EN 6249 |
| Beschermende kleding | ISO 15025 |
| Small splaches of molten metal | EN 348 ISO 9150 |
| Convective heat transfer | EN 367 EN ISO 9151 |
| Radiant heat transfer | EN 366 EN ISO 6942 20 kw/m2 |
| Radiant heat transfer | EN 366 EN 469 40 kw/m2 |
| Molten metal splash | EN 373 ISO 9185 |
| Protection against heat and flame. | EN 15025 (EN 532) |
| Clothing for protection against heat and flame | EN 702 / ISO 12127 |
| Beschermende kleding voor elektrische vlamboog. | EN 61482-1-2 |
| Beschermende kleding reddingdienst | GUV-R 2106 |
| Beschermende kleding voor plant bestrijdings middelen | DIN 32781 |
| Antistatische beschermende kleding | EN 1149 series |
| Beschermende handschoenen snijtest zie ASTM F2992 | ASTM F1790-05 vervallen |
| Beschermende handschoenen snijtest | ASTM F2992 |
| Beschermende kleding tegen chemische biologisch en nucliare | BS 8467 |
| Beschermende kleding voor straalwerkzaamheden | EN ISO 14877 |
| Duikuitrusting | EN 14225 |
| Sport vloeren (richtlijnen) | EN 14904 |
| Mondkapjes | EN 149 snel test |
| Mondkapjes | EN 149 certificering |
| Maatvoering controle handshoenen, kosten per maat | Inhouse methode |
| Medisch | |
| Primary Wound Dressings - Part 1: Aspects of Absorbency | EN 13726-1 |
| Primary Wound Dressings - Part 3.2: Free Swell | EN 13726-1 |
| Primary Wound Dressings - Part 3.3: Fluid Handling capacity | EN 13726-1 |
| Primary Wound Dressings - Part 3.4: Fluid Affinity | EN 13726-1 |
| Primary Wound Dressings - Part 3.6: Dispersion Characteristics | EN 13726-1 |
| Primary Wound Dressings - Part 3.6: Dispersion/solubility of Hydrogels | EN 13726-1 |
| Primary Wound Dressings - Part 3.2: MVTR non direct liquid Moisture Vapour Transmission Rate of Permeable Film Dressings | EN 13726-2 |
| Primary Wound Dressings - Part 3.3: MVTR direct Liquid Transmission Rate of Permeable Film Dressings | EN 13726-2 |
| Test methods for primary wound dressings Part 3: Waterproofness | EN 13726-3 |
| Conformability (Extensibility & Permanent Set) | EN 13726-4 |
