Skip to main content

Fysisch

MTRS LAB heeft een groot aanbod van fysische testen. Hierbij kunt u denken aan Pilling, Was echtheden, Constructie, Gewicht, Treksterkte, Snagging, Slijtage, Kreukgedrag, Poolkenmerken, Adhesie, Elastisch herstelvermogen, Waterkolom, Luchtdoorlaat baarheid Was proeven, Kleurechtheden, Waterdampweerstand RET, Thermisch weerstand RCT waarde en nog veel meer.

Maar ook fysische testen voor Kunststoffen, Hout en Metaal zoals, Treksterkte, Puncture Doorlaatbaarheid van gassen, Elektrostatische eigenschappen, UV veroudering, Verkleuring door Xenon licht, Slipweerstand, Geluid metingen, Corrosie, Wrijvingscoëfficiënt etc.

Een groot aantal proeven treft u in onderstaande lijst aan. Wellicht kan het zijn dat uw test er niet bij staat, neem in dat geval geheel vrijblijvend contact met ons op.

Onderzoek Norm
Weefsels/Breisels/NON-wovens
Sterktemeting
Treksterkte tot  50Kn (2 richtingen, striptest) ISO 13934-1  BS5081-1
Treksterkte tot  50Kn (2 richtingen, grabtest ) ISO 13934-2  BS5081-2
Treksterkte tot  250Kn (2 richtingen, striptest) ISO 13934-1  BS5081-1
Treksterkte tot  250Kn (2 richtingen, grabtest ) ISO 13934-2  BS5081-2
Treksterkte  rubber (****) ISO 283
Treksterkte  gecoat materiaal ISO 1421
Treksterkte non-woven ISO 9073-3
Treksterkte woven Wing rip techniek BS 4303
Peel or stripping test (hechtsterkte) ASTM D903-98
Scheursterkte (weefsels)
Scheurweerstand volgens Elmendorf ISO 13937-1
Scheurweerstand, enkele scheurmethode, Trouser shape ISO 13937-2
Scheurweerstand, enkele scheurmethode, Wing shape ISO 13937-3
Scheurweerstand, dubbele scheurmethode, tongue-shaped  ISO 13937-4
Scheurweerstand, gecoat materiaal ISO 4674-1
Scheurweerstand, Trapezium DIN 53859-5
Naadvastheid (weefsels)
Naadsterkte/vastheid ( 2 richtingen, striptest ) ISO 13935-1 
Naadsterkte/vastheid ( 2 richtingen, grabtest ) ISO 13935-2
Naadschuifweerstand op naden 3 of 5 mm naadopening fixedseamopening ISO 13936-1
Naadschuifweerstand op naden fixed load method ISO 13936-2
Naadschuifweerstand op naden 3 of 5 mm naadopening fixedseamopening BS 3320
Barstdruk (breisels)
Doordrukkracht, barstdruk, berstdruk Hydraulisch, Dry and wet ISO 13938-1
Doordrukkracht, barstdruk, berstdruk Pneumatisch ISO 13938-2
Doordrukkracht, barstdruk, berstdruk BS 4768
Doordrukkracht, barstdruk, berstdruk BALL Diaphragm ASTM D3787
Doordrukkracht, barstdruk, berstdruk Mullen Diaphragm ASTM D3786
Constructie
Aantal draden (2 richtingen) ISO 7211-2
Aantal steken/staven (2 richtingen) TLM
Binding, eenvoudig ISO 3572
Breiaard, eenvoudig EN ISO 4921
Binding, gecompliceerd ISO 3572
Breiaard gecompliceerd EN ISO 4921
Aantal poolpluizen TLM
Garenlengte/ steek (incl. lin. Massa) TLM
Twist, garens ISO 7211-4
Twist, uit weefsel ISO 7211-4
Alfa (twist en garen nummer verplicht) TLM
Garennummer (spoel) ISO 2060
Garennummer (weefsel ketting) ISO 2060
Garennummer (weefsel inslag) ISO 2060
Garennummer (breisels) NFG 07-101
Massa
Afmetingen TLM
Diktemeting textiel ISO 5084
Diktemeting textiel DIN 53885
Diktemeting papier ISO 534
Diktemeting kunststof ISO 4593
Gewicht per m2, textiel weefsels ISO 3801
Gewicht per m2, textiel breisels ISO 12127
Gewicht per m2, papier ISO 536
Gewicht per m2, kunststof/folie ISO 1183-1:2012 only par. 5.1.4.1
Gewicht per m2, geotextiel ISO 9864
Poolgewicht/m2 EN 12127
Pilling
ICI pilling tot 10000 omw. ISO 12945-1, BS 5811 
ICI pilling tot 20000 omw. ISO 12945-1, BS 5811
ICI pilling tot 30000 omw. ISO 12945-1, BS 5811
ICI pilling tot 40000 omw. ISO 12945-1, BS 5811
Martindale pilling ISO 12945-2
Martindale pilling na 3* wassen ISO 6330 (temp. naar keuze) Hangend drogen ISO 12945-2
Martindale pilling ASTM D4970
Brushing Pilling ASTM D3511
Elastomric Pad Pilling ASTM D3414
Random thumbler Pilling (30 minuten) ASTM D3512
Random thumbler Pilling (30 minuten) ISO 12945-3
Snagging
Snagging ICI snagging box tot 18000 omw. ISO 12945-1-SNAGGING
Snagging mace method ASTM D3939
Snagging (bean Bag Snag Tester) ASTM D5362
Snagging (octagonal chamber) ** BS 8479
Slijtage
Slijtweerstand Martindale Onder natte Condities Toeslag per 5000 omw. ISO 12947-2
Slijtweerstand Martindale tot 10000 omw. ISO 12947-2
Slijtweerstand Martindale tot 20000 omw. ISO 12947-2
Slijtweerstand Martindale tot 50000 omw. ISO 12947-2
Slijtweerstand Martindale tot 100000 omw. ISO 12947-2
Slijtweerstand Martindale tot 6000 omw. + classificatie meubelstoffen + 4 controlles ISO 12947-2 + EN 14465
Slijtweerstand Martindale tot 20000 omw. + classificatie meubelstoffen + 11 controlles ISO 12947-2 + EN 14465
Slijtweerstand Martindale tot 45000 omw. + classificatie meubelstoffen + 16 controlles ISO 12947-2 + EN 14465
Slijtweerstand Martindale tot 100000 omw. + classificatie meubelstoffen + 21 controlles ISO 12947-2 + EN 14465
Slijtweerstand Martindale bepaling van massa verlies vanaf ISO 12947-3
Slijtweerstand Martindale beoordeling van verandering van uiterlijk na 12.000 toeren ISO 12947-4
Slijtweerstand Martindale Kunstleer (rubber or platic coated) EN ISO 5470-2 Methode 1 dry
Slijtweerstand Martindale Kunstleer (rubber or platic coated) EN ISO 5470-2 Methode 2 dry
Slijtweerstand Martindale Kunstleer (rubber or platic coated) EN ISO 5470-2 Methode 1 wet
Slijtweerstand Martindale Kunstleer (rubber or platic coated) EN ISO 5470-2 Methode 2 wet
Martindale Ball Plate slijtweerstand VDA 230-211
Martindale Ball Plate slijtweerstand EN ISO 17076-2
Martindale Ball Plate slijtweerstand IUP 48-2 (IULTCS)
Martindale Ball Plate slijtweerstand BMW AA-0412
Martindale micro scratch methode A, Change is Gloss, 3M type 7447 zeer fijn (roodbruin), 6N, 80 rubs EN 16094 methode A
Martindale micro scratch methode B, Amount of scratches,  3M type 7440 medium fijn (bruin), 4N, 160 rubs EN 16094 methode B
Martindale Line contact plate slijtweerstand TLM
Slijtweerstand Rotary drum DIN 53516
Slijtweerstand Frank Hauser Din 53528
Taber Slijtweerstand coated fabric incl. 2 gewichts metingen en 1000 omw ASTM D3389
Taber Slijtweerstand textiel max 1000omw excl beoordeling ASTM D3884
Taber CS10 Slijtweerstand kunststof, rubber incl. 1 beoordeling EN ISO 5470-1
Taber CS17 Slijtweerstand kunststof, rubber incl. 1 beoordeling EN ISO 5470-1
Taber H10 Slijtweerstand kunststof, rubber incl. 1 beoordeling EN ISO 5470-1
Taber H18 Slijtweerstand metaal, kunststof, rubber incl. 1 beoordeling EN ISO 5470-1
Taber Slijtweerstand leer incl. 1 beoordeling EN ISO 17076-1
Taber Slijtweerstand incl. 1 beoordeling GME 60345-1
Extra beoordelingen bij Taber test -
Wyzenbeek  Slijtweerstand tot 15000 omw. ASTM D4157
Wyzenbeek Slijtweerstand  per 5000 omw. Extra ASTM D4157
Slijtweerstand Oscillatory Cylinder Method (max 50.000 rubs) ASTM D4157-10
Slijtweerstand Shopper tot 5000 omwentelingen DIN 53863-2
Martindale slijtweerstand panty sokken EN DIN 13770
Kreukgedrag
Wash and wear rating (1 *wassen hangend drogen) ISO 7768 + ISO 6330
Wash and wear rating (1 *chemisch wassen) ISO 7768 + ISO 3175
Wash and wear rating (1 *wassen hangend drogen en strijken) ISO 7768 + strijken
Wash and wear rating (1 *wassen hangend drogen) AATCC 124
Wash and wear rating (5 *wassen en 5*droogtrommel) AATCC 124
Kreukhoek droog in 5-voud (Monsanto) EN 22313
Kreukhoek droog en nat in 5-voud EN 22313
Cylinder kreukproef ISO 9867
Cylinder kreukproef AATCC 128
Poolkenmerken
Poolverankering vloerbedekking ASTM D1335
Poolverankering vloerbedekking ISO 4919
Poolverankering vloerbedekking IWS 202
Poolverankering vloerbedekking BS 5229
Poolverankering Badhandoek EN 15598
Poolverlies BS 4655
Poolverlies BS 2543-ann. C
Poolverlies BS 2543-ann. D
Toucher
Drapeervermogen BS 5058
Kawabata (compression, Bending, Surface, Shearing, Tensile) Kawabata
Buiging
Buiging crumple flex 10 proefstroken ISO 8096-ann. F
Buiging crumple flex 4 proefstroken ISO 8096-ann. F
Buiging schildknecht ISO 7854-A
Buiging schildknecht klein ISO 7854-B
Buiging schildknecht Groot ISO 7854-C
Buiging gelboflex EN 531-ann. 2
Buigstijfheid (nonwoven) DIN 53350
Buiging Textiel met kunstof laag flexometer EN 32100
Buiging voor kunstleer DIN 53359
Koudebestendigheid (***) -25, -30, -35, -40 graden celcius (Bending) EN ISO 1876-1 
Koudebestendigheid (***) -25, -30 graden celcius (Impact on Loop) EN ISO 1876-2
Koudebestendigheid (***) -25, -30, -35, -40, -68 graden celcius (Impact on Loop) EN ISO 1876-2
Koudebestendigheid (***) bij verschillende temperaturen van tot opgeven (Impact on Loop) EN ISO 1876-2
flexcibiliteit bij lage temperaturen van Bitumen EN 13859-1/2
flexcibiliteit bij lage temperaturen van Bitumen EN 1109:1999
Cold crack resistance tot -25℃ ASTM D751 sec 61-64,1
Stijfheid, Buigstijfheid, Cantilever DIN 53362
Meerprijs bij andere temepraturen dan kamer temp, Stijfheid, Buigstijfheid, Cantilever DIN 53362
Bally flex testing leer/kunststof 25000 omw. ISO 5402-1
Bally flex testing leer/kunststof 25000 omw. ISO 17694
Adhesie
Adhesie Coating With Bounding With water soak DIN 53357-A
Adhesie Coating With Bounding DIN 53357-A
Adhesie Coating DIN 53530
Adhesie Coating ISO 2411
Adhesie gelaste voering DIN 54310
Adhesie rubber ISO 8033
Adhesie rubber BS 903-A12
Hechtsterkte, weefsellaminaten/coatings ( 1 richting ) ASTM D2724-87
Stretch Recovery Elastisiteit
Elastisch herstelvermogen van Sealants ISO 7389
Elastisch herstelvermogen IWS TM 179: 1972
Elastisch herstelvermogen IWS TM 179: 1997
Rek test Weefsels DIN EN 53835-13
Rek test Breisels DIN EN 53835-14
Stretch and Recovery test, Determination of the elasticity of woven-, knitted, non-woven fabrics, Method A strip test. 5 cycles EN 14704-1 methode A
Stretch and Recovery test, Determination of the elasticity of woven-, knitted, non-woven fabrics, Method B  looped test, 5 cycles. EN 14704-1 methode B
Stretch and Recovery test, Determination of extension set, Leer. 5 cylces ISO 17236
Diverse
Doorprikweerstand EN 963
Button tear-off force / button opening force, based on 71-1 Tear-off forces of the metal components 90 N  EN 71-1
Button tear-off force / button opening force, only opening force in house method (open 200 x, open 500 x)  TLM
Button tear-off force / button opening force BS 7907 EN 14682
Peel Strength (klitteband) voor en na 10.000 cycli EN ISO 22776
Shear Strength (klitteband) voor en na 10.000 cycli EN ISO 22777
Scorch test (na chlorine behandeling) DIN 54283
Thermische schokbestendigheid van theeglazen TLM protocol 1001
Electrochemical Resistance of Coolant System Hoses and Materials SAE J 1684
Electrochemical Resistance of Coolant System Hoses and Materials SAE J 20
Absorptie textiel ISO 20158
Cone penetration worked 60 strokes ASTM D217
Cone penetration Unworked 60 strokes (grease) ASTM D217
Dropping Point Grease ASTM D217
NON Wovens
Gewicht ISO 9073-1
Dikte ISO 9073-2
Treksterkte ISO 9073-3
Scheurweerstand ISO 9073-4
Absorptie ISO 9073-6
Bepaling van de buiglengte ISO 9073-7
Gelbo flex test (comform EN 13795 OK textiel) ISO 9073-10
Doordrukkracht, berstdruk ISO 13938-1
Drapeerbaarheid BS 5335-1/2
Kolomproef waterdichthied textiel tot 5 meter EN DIN ISO 811
Kolomproef waterdichthied textiel tot 20 meter EN DIN ISO 811
Kolomproef waterdichthied textiel tot 4 meter BS 3424-29
Bundesmann DIN EN 29865
Spraytest ISO 9073-17
Luchtdoorlatendendheid ISO 9237
Brandtest, vertikaal twee richtingen ISO 6941
Absorptie / Waterabsorberend vermogen TLM 15
Absorptie snelheid gemeten met water TLM 16
Absorptie water Hydrophiel finish. AATCC 79
Compression
Compression test papieren kokers diameter <300mm ISO 11093-9
Compression test papieren kokers diameter >300mm ISO 11093-9
Ritsluiting
Ritsluiting test alle aspecten incl. 200 bewegingen EN 16732
Ritsluiting test continue per 200 bewegingen EN 16732
Ritsluiting duurtest extra omwentelingen per 200 bewegingen EN 16732
Ritsluiting Croswise zipper Strength  EN 16732
Ritsluiting Pull-off strength of a zipper tooth EN 16732
Ritsluiting Top Stop holding strength EN 16732
Ritsluiting Bottom stop holding strength   EN 16732
Ritsluiting Box holding strength EN 16732
Ritsluiting Slider lock strength EN 16732
Ritsluiting Tensile strength of the slider  EN 16732
Wasproeven
Krimp door wassen en drogen NEN EN ISO 6330 / 3759 / 5077
Huishoudelijk wassen, zonder meten e.d TLM
Krimp door stoom voor wol producten ISO 3005
Stoompers krimp (Hoffman press) Din 53894 T2
Krimp door water - Drenkproef ISO 7771
Krimp door water - Drenkproef NEN 1745
Krimp door chemisch reinigen after cleaning and finshing ISO 3175-1 / 3759
Krimp door chemisch reinigen tetrachloroethene ISO 3175-2 / 3759
Krimp door chemisch reinigen hydrocarbon solvents ISO 3175-3 / 3759
Krimp door chemisch reinigen simulated wetcleaning ISO 3175-4 / 3759
Krimp door strijken / persen 1 temperatuur ISO 5077
Krimp door strijken / persen 3 temperaturen ISO 5077
Plooivastheid na wassen ISO 7769
Stiknaden na wassen ISO 7770
Zelfstrijkendheid wash and wear ISO 7768
Spirality/Draaiing incl. wassen for Fabrics, Methode A ISO 16322-2
Spirality/Draaiing incl. wassen for garments, Methode A ISO 16322-3
Bodytwist (excl. wassen) BS 2819
Droogtrommel drogen toeslag TLM
Stability to Wira (free Steam) BS 4323
Industrieel wassen per keer incl. trommel drogen (*) ISO EN DIN 10528
Industrieel wassen per keer incl. trommel drogen (*) ISO EN DIN 12138
Industrieel wassen aanloopkosten eenmalig per opdracht.
Industrieel wassen per keer incl  tunnel drogen (***) ISO EN DIN 15797
Industrieel wassen per keer incl. trommel drogen (*) ISO EN DIN 15797
Industrieel krimp bepalen na wassen ISO 5077
Bij industrieel wassen dient u minimaal 20kg begeleidings materiaal mee te sturen van de zelfde kwaliteit.
Kleurechtheden
Wasechtheid / Kleurechtheid, proef 1  ISO 105 C01
Wasechtheid / Kleurechtheid, proef 2 ISO 105 C02
Wasechtheid / Kleurechtheid, proef 3 ISO 105 C03
Wasechtheid / Kleurechtheid, proef 4 ISO 105 C04 vervallen verangen door C10
Wasechtheid / Kleurechtheid, proef 5 ISO 105 C05
Wasechtheid / Kleurechtheid, proef 6 ISO 105 C06
Wasechtheid / Kleurechtheid, proef 8 vanaf ISO 105 C08
Oxidative Bleach Response ISO 105 C09
Wasechtheid / Kleurechtheid ISO 105 C10
Wasechtheid / Kleurechtheid industrieel ISO 105 C12
Chemisch reinigen / Dry cleaning (m) ISO 105 D01
Organische solventen ISO 105 D02
Water ISO 105 E01
Zeewater keuze  ISO 105 E02
Chloorechtheid, één concentratie 20, 50 of 100mg (standaard is 50mg) ISO 105 E03
Zweet ( 2pH's ) (m) ISO 105 E04
Spatten zuur (m) ISO 105 E05
Spatten alkali ISO 105 E06
Spatten water ISO 105 E07
Spatten heet water ISO 105 E08
Bleken met Hypocloriet (m) ISO 105 N01
Bleken met Peroxide (m) ISO 105 N02
Bleken ISO 105 N03
Bleken ISO 105 N04
Droge verhitting per temp. ISO 105 P01
Stickoxide (NOX) echtheid ISO 105 G01
Burnt-gas fumes / Verbrandingsgasechtheid ISO 105 G02
Burnt-gas fumes / Verbrandingsgasechtheid AATCC 23
Ozonechtheid op maat 50 ppm 40graden celcius een controle punt prijs bij minimaal 10 stalen
Ozonechtheid op maat extra controle punt prijs bij minimaal 10 stalen
Determination of resistance to ozone cracking ISO 3011
Ozonechtheid ISO 105 G03
Ozon bestendigheid DIN 53509
Ozon bestendigheid (24 uurs cyclus) ISO 1431
Colour fastness to carbonizing ISO 105 X01
Colour fastness to carbonizing ISO 105 X02
Colour fastness to chlorination ISO 105 X03
Colour fastness to mercerrizing ISO 105 X04
Colour fastness to Organische oplosmiddelen, per middel ISO 105 X05
Colour fastness to soda boiling ISO 105 X06
Formaldehyde ISO 105 X09
Migratie naar PVC ISO 105 X10
Strijken en persen 1 temperatuur ISO 105 X11
Strijken en persen 3 temperatuur ISO 105 X11
Wrijfechtheid (droog en nat) ISO 105 X12
Wrijfechtheidvoor kleine oppervlaktes (droog en nat) ISO 105 X16
Colour fastness to Shampoo BS 1006 UK-TB
Opdruk levensduur eerste wasbeurt Durawash
Opdruk levensduur eerste wasbeurt Wascator
Opdruk levensduur extra wasbeurten extra wasbeurten
Non chlorine bleach AATCC TM172
Sublimatie DIN 54056
Phenolic Yellowing (vergeling textiel Courtaulds Method) ISO 105 X18
Speeksel echtheid DIN 53160-1
Zweet echtheid DIN 53160-2
Professioneel chenmisch reinigen ISO 3175-1
Professioneel chemische reinigen Perchlorethyleen (Tetrachlorethen) ISO 3175-2
Microscopie
Microscopisch grondstof onderzoek TLM
Scheiding van draden EEG methode
Grondstof controle, microscopisch, eenvoudige garens TLM
Grondstof controle, microscopisch, gecompliceerde garens TLM
Schatting in preparaten TLM
Foto´s per stuk TLM
Elektronen microscooop 2000* tot 4000* per uur
Kleurmeting
Kleurvergelijking grijsschaal kleurverandering ISO 105 A02
Kleurvergelijking grijsschaal aan- en afbloeden ISO 105 A03
Kleurvergelijking/meting digitaal DeltaE CIE lab ISO 11664-4
Kleurvergelijking/meting digitaal DeltaE CIE lab ISO 105 J03
Kleurvergelijking/meting digitaal DeltaE cmc ISO 105 J03
Kleurvergelijking/meting digitaal RGB DIN 5033
Beoordeling van ISO 4892-2 samples Kleurmeter ISO 7724 ISO 4582
Neon reflectie meting (zonder veroudering) EN ISO 20471
Neon reflectie meting (zonder veroudering) EN ISO 20471
Neon reflectie meting (met xenon belichting) 2 metingen *** EN ISO 20471
Neon reflectie meting (excl. xenon belichting) 1 meting *** GORT 3279
Retro reflextie meting (Reflexieband) 1 meting *** EN ISO 20471
Beschermende kleding (retro reflectie meting) 1 meting *** ANSI 107-2010
Beschermende kleding (retro reflectie meting) 1 meting *** CSA Z96-2009
Photoluminescent pigments and products –  DIN 67510-1
Part 1: Measurement and marking at the producer, licht bron 1000lx
Ships and marine technology –  ISO 15370
Low-location lighting on passenger ships – licht bron 25lx
Witheidgraad Weißgrad nach Ganz / Griesser ISO 11475
Witheidgraad Ganz / Griesser incl 10*wassen 105c06 mt. E1S ISO 11475
Vezels
Katoen
Fijnheid uit lengte en massa ISO 1144
Vezeldiameter, synthetisch ISO 137
Vezeldiameter, synthetisch ISO BS2043
Fijnheid denier bepaling basis ISO 137
GMO analyse (DNA op ruwe katoen, garen, doek) PGS-V1
Wol
Wolfijnheid ISO 137 / BS2043
Wol fiber diameter BS2043
Wol fiber diameter IWS TM 24
Vezellengte garen/spoel DIN 53808 wyra methode
Vezellengte Fabric two directions DIN 53808 wyra methode
Vlas
Airflow ISO 2370
Garens
Nummerbepaling
Garennummer (spoel) ISO 2060
Garennummer (weefsel ketting) ISO 2060
Garennummer (weefsel inslag) ISO 2060
Treksterkte
Treksterkte garen tot 5Kn van cone, excl. Garennummer N=20 ISO 2062
Treksterkte garen tot 5Kn van cone, excl. Garennummer N=50 ISO 2062
Treksterkte garen tot 5Kn uit weefsel, inslag, excl. Garennummer N=10 ISO 2062
Treksterkte garen tot 5Kn uit weefsel, ketting, excl. Garennummer N=10 ISO 2062
Treksterkte garen tot 5Kn uit weefsel, ketting, excl. Garennummer N=10 ASTM D885
Treksterkte garen tot 250Kn van cone, excl. Garennummer N=20 ISO 2062
Torsie
Torsie EN 22061
Twist, enkelvoudig garen ISO 2061
Twijn, twee- of meervoudig garen basis ISO 2061
Regelmatigheid
Grading ASTM D2255
Gewichten
Handeslmassa ISO 6741
Diverse
Aantonen gekamde katoen TLM
Aantonen ringspin / open end garen TLM
Finess of Fibre:filamente (garennummer verplicht) TLM
Wrijvingscoefficient ISO 8295
Wrijvingscoefficient Dry and leather ASTM D 2047
Wrijvingscoefficient Rubber and neolite ASTM D 2047
Wrijvingscoefficient Dry, leather, rubber and neolite ASTM D 2047
Cutting resistance ASTM F 2992
Doorlaatbaarheid
Ten opzichte van licht
UV doorlaatbaarheid zon beschermings factor AUS. New zealand AS-NZS 4399
UV doorlaatbaarheid UPF factor EN 13758-1
UV doorlaatbaarheid Beschermings factor AATCC 183
UV doorlaatbaarheid Beschermings factor UV standaard 801
FAR (FIR) Infrared measurement (reflextion) EN 410 in comb EN 13363-1
Transmittance 380-800 Nm in stappen van 5Nm EN 410
Transmittance 380-2500 Nm in stappen van 5Nm EN 410
Solar/Light/UV transmittance (rolgordijnen) incl classificatie EN 410, EN 13363-1 en EN 14501 
Solar/Light/UV transmittance (rolgordijnen) zonder classificatie EN 410, EN 13363-1
Openess factor (zonwering) EN 410 in comb EN 13363-1
Total solar energy transmittance Gtot- classification EN DIN 14501 tabel 2
Seconday Heat transfer factor Gi,tot - classification EN DIN 14501 tabel 3
Normal/normal solar transmittance - Classifaction EN DIN 14501 tabel 4
Blackout meting / Verduisterend effect gordijnen tabel 6 klasse; Blackout of verduisterend.) EN DIN 14501 tabel 6
Verduisterend effect gordijnen tabel 7, klasse: 1(10lux), 2(1000lux), 3(75000lux) EN DIN 14501 tabel 7
Visueel Comfort Tabel 8, klasse: 0,1,2,3,4 EN DIN 14501 tabel 8 met  EN 410
Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics, Procedure B (Spektrophotometer) ASTM D1003-07 methode B
Determination of the emissivity of the surfaces of glass and coated glass EN 12898:2001
Transmision and Reflection degree IR (2.500nm until 50.000nm) EN 673
Cacuclatiio U value IR from above (2.500nm until 50.000nm) EN 673
Ten opzichte van lucht
Luchtdoorlatendheid EN DIN ISO 9237
Ten opzichte van olie
Oil Repelancy (Oleophobe finish.) DIN EN ISO 14419
Ten opzichte van water
Kolomproef waterdichthied textiel tot 5 meter EN ISO DIN 811  (20811 vervallen)
Kolomproef waterdichthied textiel tot 20 meter EN ISO DIN 811
Kolomproef na 5 x wassen EN ISO DIN 811
Kolomproef na 5x chemisch reinigen EN ISO DIN 811
Kolomproef hydrolic waterdichthied AATCC 127
Bundesmanntest DIN EN 29865
Spray-test Hydrophobe finish. ISO 4920
Spray-test ISO 4920
Spray-test AATCC 22
Water repellency Tumble Jar AATCC 70
Water repellency Rain Test AATCC 35
Wira shower BS 5066
Waterdichthied bitumen 24 uur Din EN 1928-B
Ten opzichte van waterdamp
Waterdampdoorlatendheid leer DIN EN ISO 14268
Waterdampdoorlatendheid coated fabrics BS 3424-34
Waterdampdoorlatendheid fabrics BS 7209 appendix B
Waterdampdoorlatendheid Kunststoffen/folie Methode A1, A2, B1, B2 JIS 1099
Waterdampdoorlatendheid folie Desiccant method ambient temp. 23⁰C inside cup 0% RH, Outside cup 50% RV  ASTM E96 methode A
Waterdampdoorlatendheid folie Water method ambient temp. 23⁰C inside cup 100% RH, Outside cup 50% RV  ASTM E96 methode B
Waterdampdoorlatendheid folie Desiccant method ambient temp. 32,2⁰C inside cup 0% RH, Outside cup 50% RV  ASTM E96 methode C
Waterdampdoorlatendheid folie Water method ambient temp. 32.2⁰C inside cup 100% RH, Outside cup 50% RV  ASTM E96 methode D
Waterdampdoorlatendheid folie Desiccant method ambient temp. 37.8⁰C inside cup 0% RH, Outside cup 90% RV  ASTM E96 methode E
Waterdampdoorlatendheid folie Inverted Water method ambient temp. 23⁰C inside cup 100% RH, Outside cup 50% RV  ASTM E96 methode BW
Ten opzichte van chemicaliën
Olie afstotendheid AATCC 118
Ten opzichte van temperatuur
TOG rating british standard (kinderen) BS 4745 and BS 5335
TOG rating british standard (volwassenen) BS 4745 and BS 5335
Thermisch weerstand RcT waarde EN 52616
R, U, Lamda (isolatiemateriaal) 1 temperatuur EN 12667 paragraaf 9
R, U, Lamda (isolatiemateriaal) 3 temperaturen EN 12667 paragraaf 9
R, U, Lamda (isolatiemateriaal) 3 temperaturen EN 12667 paragraaf 9
R, U, Lamda (isolatiemateriaal) 1 temperatuur ISO 8302
R, U, Lamda (isolatiemateriaal) 1 temperatuur ASTM C177
R, U, Lamda (isolatiemateriaal) 1 temperatuur EN 12664
R, U, Lamda (isolatiemateriaal) 1 temperatuur EN 12939
R, U, Lamda (isolatiemateriaal) 1 temperatuur DIN 52612
Lambda waarde 10 metingen DIN 52612
R, U, Lamda (isolatiemateriaal) 1 temperatuur EN 13163
Determination of thermal resistance ISO 5801-1
Ten opzichte van elektricieteit
Elektrische oppervlakte weerstand DIN 54345-1
Ten op zichte van gas, Carbone dioxid, water, zuurstofsen etc.
Testing of plastics - Determination of gas transmissionsrate - Part 1: Volumetrical method for testing of plastic films. DIN 53380-1
Testing of plastics - Determination of gas transmission rate - Part 2: Manometric method for testing of plastic films. DIN 53380-2
Testing of plastics - Determination of gas transmission rate - Part 3: Oxygen-specific carrier gas method for testing of plastic films and plastics mouldings. DIN 53380-3
Testing of plastics - Determination of gas transmission rate - Part 4: Carbon dioxide specific infrared absorption method for testing of plastic films and plastic mouldings. DIN 53380-4
Testing of carbon materials; determination of the coefficient of permeability by means of the vacuum-decay method with air as experimental gas; solid matters. DIN 51935
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 6: Determination of carbon dioxide permeability. DIN EN 1062-6
Plastics - Determination of the gas transmission rate of films and thin sheets under atmospheric pressure - Manometric method. DIN EN ISO 2556
Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique). DIN EN ISO 6179
Rubber, vulcanized – determination of permeability to gases – Constant volume method.  ISO 1399
Rubber, vulcanized or thermoplastic – determination of permeability to gases ISO 2782
Rubber- or plastics-coated fabrics – measurement of gas permeability ISO 7229
Plastics – Film and sheeting – Determination of gas transmission rate – Instrument method – Part 1: Differential-pressure method ISO 15105-1
Plastics – Film and sheeting – Determination of gas transmission rate – Instrument method – Part 1: Equal-pressure method. ISO 15105-2
Standard test method for oxygen transmission rate through packages using a coulometric sensor ASTM F 1307 – 02
Standard test method for determining gas permeability characteristics of plastic film and sheeting ASTM D 1434 - 82
Standard test method for oxygen gas transmission rate through plastic film and sheeting using a coulometric sensor ASTM D 3985 – 02
Standard test method for oxygen gas transmission rate, permeability and permeance at controlled relative humidity through barrier materials using a coulometric detector ASTM F 1927 – 98
Testing of thermal insulation; determination of water vapour permeability of building and insulating materials DIN 52615
Testing of plastics and elastomer films, paper, board and other sheet materials - Determination of water vapour transmission - Part 1: Gravimetric method. DIN 53122-1
Testing of plastics and elastomer films, paper, board and other sheet materials - Determination of water vapour transmission - Part 2: electrolysis method. DIN 53122-2
Thermoplastic and elastomeric roofing and sealing sheets; Determination of water vapour transmission properties DIN EN 495-4
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of water vapour transmission properties DIN EN 1931
Self adhesive tapes - Measurement of water vapour transmission in a warm humid atmosphere DIN EN 12023
Thermal insulating products for building applications - Determination of water vapour transmission properties DIN EN 12086
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 2: Determination and classification of water-vapour transmission rate (permeability). DIN EN ISO 7783-2
Hygrothermal performance of building materials and products - Determination of water vapour transmission properties EN ISO 12572
Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 1: Humidity detection sensor method. ISO 15106-1
Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method ISO 15106-2
Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 3: Electrolytic detection sensor method ISO 15106-3
Standard  test method for water vapor transmission of materials ASTM E 96 – 00
Standard  test method for water vapor transmission rate of flexible barrier materials using an infrared detection technique ASTM F 372 – 99
Standard  test method for water vapor transmission rate of sheet material using dynamic relative humidity measurement ASTM E 398 – 03
Standard  test method for water vapor transmission rate through plastic film and sheeting using a modulated infrared sensor ASTM F 1249 – 01
Standard  test method for water vapor transmission of organic coating films ASTM D 1653 – 03
Standard  test method for evaluation of solubility, diffusivity, and permeability of flexible barrier materials to water vapor ASTM F 1770 – 97
Standard  test method for water vapor transmission of flexible heat-sealed packages for dry products ASTM D 3079 – 94
Standard  test method for moisture in plastics by coulometry ASTM D 4019 – 81
Standard  test method for determining water vapor transmission rates through nonwoven and plastic barriers ASTM D 6701 – 01
Testing methods for water vapor transmission rates of plastic film and sheeting (instrument method). JIS K 7129
Testing methods for determination of the water vapour transmission rate of moisture-proof packaging materials (dish method) JIS Z 0208
Thermal Insulation Testings; Determination of Thermal Conductivity by the Tube Method. DIN 52613
POROMETER
Porometer pore size of fabrics BS 3321
Porometer pore size of fabrics (prijs bij 20 metingen) BS 3321
Porometer membrame filters bubble point method ASTM F316
Porometer membrame filters automated liquid ASTM E1294
Porometer non woven membrame filters automated liquid ASTM D1117-80
Porometer bubble test pore size BS EN 24003
Porometer of evaluation by liquid expulsion  BS 7591-4
Porometer Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test ASTM D 6767
Porometer Permeable sintered metal materials Determination of bubble test pore size DIN ISO 4003
Porometer Membrane filters Testing for bubble point DIN 58355-2
Porometer Hydraulic fluid power -- Filter elements -- Verification of fabrication integrity and determination of the first bubble point  BS ISO 2942
Elektrostatisch
Elektrische oppervlakte weerstand horizontaal DIN 54348 T. 1
Elektrische oppervlakte weerstand horizontaal BS DIN EN 1149-1
Elektrische oppervlakte weerstand verticaal BS DIN EN 1149-2
Elektrische oppervlakte weerstand charge Decay excl wassen BS DIN EN 1149-3
Elektrische oppervlakte weerstand, point to point, incl.wassen BS EN 61340-5-1
Wassen voor bovenstaande norm
Shirly methode 138 Shirly methode 138
Elektrische oppervlakte weerstand horizontaal BS 2050
Elektrische oppervlakte weerstand BS 6524
Elektrische oppervlakte weerstand FTMS 101c Methode 4046
Elektrische oppervlakte weerstand BS EN ISO 11611 :clause 6.2 vertikaal
Elektrische oppervlakte weerstand vloerbedekking/afwerking BS 6654
Elektrische oppervlakte weerstand vloerbedekking/afwerking IBM & ICL
Elektrische oppervlakte weerstand vloerbedekking/afwerking(1) BS ISO 10965
Elektrische oppervlakte weerstand vloerbedekking/afwerking(1)(2) BS ISO 6356
(1) indien antistatisch behandeld volgend BS En 14041 dan eerst reinigen.
(2) BAM ipv Neolite sole.
Elektrische oppervlakte weerstand vloerbedekking/afwerking EN 1815
Elektrische oppervlakte weerstand vloerbedekking/afwerking EN 1081
Classificatie op basis van EN 1815 en EN 1081 EN 14041
Elektrische oppervlakte weerstand DIN 54345-1
Elektrische oppervlakte weerstand DIN 54345-2
Elektrische oppervlakte weerstand DIN 54345-5
Elektrische oppervlakte weerstand DIN 54345-6
Rubber insullation test IEC 60111
Elektrische oppervlakte weerstand DIN 54345-6
Elektrische oppervlakte weerstand oppervlakte weerstand ASTM D 257
Elektrische oppervlakte weerstand volume weerstand ASTM D 257
Elektrische oppervlakte weerstand volume weerstand ASTM D 257
Volume resistivity and surface resistivity of solid electrical insulating materials DIN IEC 60093
Dielectric Strength, VAC (5 reps) ASTM D 149
Resistivity ASTM D 0257 SR
Elektrische oppervlakte weerstand IEC 61340-4-5
Elektrostatic hazards IEC 60079-32
Elektrostatic hazards DIN EN 12115
Elektrische oppervlakte weerstand ISO 2878
Waterdamp
Waterdampweerstand huidmodel, skin model, RET EN DIN 31092 / ISO 11092
Thermischeweerstand huidmodel, skin model, RCT EN DIN 31092 / ISO 11092
Waterdampweerstand huidmodel, skin model, RET EN DIN 31092 / ISO 11092
Thermischeweerstand huidmodel, skin model, RCT EN DIN 31092 / ISO 11092
Waterdampweerstand RET-waarde + Thermische weerstand RCT-waarde EN 31092 / DIN 52616
Thermal
Thermal Measurements building materials ISO 8302
Thermal Measurements building materials BS EN 12664
Schoenen
Wear simulation by flex resistance prEN ISO 19955
Determination of washability in domestic washing machine EN ISO 19954
Determination of heel attachment EN 12785
Determination of thermal insulation EN 12784
Determination of sole adhesion EN ISO 17708
Veroudering UV Light
UVTest Fluorescent Fluorescent UV Exposure of Plastics  ASTM D4329
UVTest Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials  ASTM G154
UVTest Coating materials and coating systems for exterior wood EN 927-6
Norm is ingetrokken en word vervangen door iso 16474 ISO 11507 Methode A
Norm is ingetrokken en word vervangen door iso 16474 ISO 11507 Methode B
UVTest Coatings, Paints and varnishes, 4h dry, 4h cond.  ISO 16474-3 methode A
UVTest Coatings, Paints and varnishes, 5h dry, 1h water spray.  ISO 16474-3 methode B
UVTest Accelerated Exposure of Automotive Exterior Material SAE J2020
UVTest Exposing Nonmetallic Materials ASTM G151
UVTest Exposing Nonmetallic Materials UVA340 Cycle 1, 4, 6 of 7 ASTM G154
UVTest Exposing Nonmetallic Materials UVB313 Cycle 2, 3, of 5 ASTM G154
UVTest Flexible sheets for waterproofing - Bitumen, plastic, and rubber sheets for roofing DIN EN 1297
UVTest Specifications for flexible intermediate bulk containers (FIBC) for non-dangerous goods  DIN EN 1898
UVTest Geotextiles and geotextile-related products  DIN EN 12224
UVTest Coil coated metals  DIN EN 13523-10
UVTest Paints and varnishes - Determination of resistance to cyclic corrosion  ISO 11997-2
UVTest Plastics Artificial Weathering  Irr.=0,76 UVA 340, 8hours dry, 4hours cond. ISO 4892-3 methode A, Cycle 1
UVTest Plastics Artificial Weathering  Irr.=0,76 UVA 340, 8hours dry, 0,25hour spray, 4hours cond. ISO 4892-3 methode A, Cycle 2
UVTest Plastics Artificial Weathering  Irr.=0,83 UVA 340, 5hours dry, 1hours spray ISO 4892-3 methode A, Cycle 3
UVTest Plastics Artificial Weathering  Irr.=0,83 UVA 340, 5hours dry, 1hours spray ISO 4892-3 methode A, Cycle 4
UVTest Plastics Artificial Weathering  Irr.=0,76 UVA 351, 24hours dry  ISO 4892-3 methode B, Cycle 5
UVTest Plastics Artificial Weathering  Irr.=0,43 UVB 313, 8hours dry 4 hours cond. ISO 4892-3 methode C, Cycle 6
UVTest Weather Resistance Outdoor funiture, tents: UV Light and Moisture Exposure 8h 0.77w/m2 60°C, 4h condensation 50°C AATCC 186 option 1
UVTest Weather Resistance Architectical: UV Light and Moisture Exposure 8h 0.77w/m2 60°C, 0,25h waterspray, 3,75h condensation 50°C AATCC 186 option 2
UVTest Weather Resistance Automitive : UV Light and Moisture Exposure 8h 0.77w/m2 70°C, 4h condensation 50°C AATCC 186 option 3
Verkleuring Xenon light
Lichtechtheid, Windows IR, tot blauwwol 5 Exposure cycle A1 (Normaal) ISO 105 B02
Lichtechtheid, Windows IR, tot blauwwol 6 Exposure cycle A1 (Normaal) ISO 105 B02
Lichtechtheid, Windows IR, tot blauwwol 7 Exposure cycle A1 (Normaal) ISO 105 B02
Lichtechtheid, Windows IR, tot blauwwol 8 Exposure cycle A1 (Normaal) ISO 105 B02
Lichtechtheid, Windows IR, prijs per uur, excl. Beoordeling, Exposure cycle A1 (Normaal) ISO 105 B02 -A1
Lichtechtheid, Windows IR, prijs per uur, excl. Beoordeling, Exposure cycle A2 (Droog) ISO 105 B02 -A2
Lichtechtheid, Windows IR, prijs per uur, excl. Beoordeling, Exposure cycle A3 (Semi tropical) ISO 105 B02 -A3
Lichtechtheid, Windows IR, prijs per uur, excl. Beoordeling, Methode 1 ISO 105 B04 Methode 1
Lichtechtheid, Windows IR, prijs per uur, excl. Beoordeling, Methode 2, standaard. ISO 105 B04 Methode 2
Lichtechtheid, Windows IR, prijs per uur, excl. Beoordeling, Methode 3 ISO 105 B04 Methode 3
Lichtechtheid, Windows IR, prijs per uur, excl. beoordeling, Condition 3 ISO 105 B06 Condition 3
Lichtechtheid, Windows B/SL, met spray prijs per uur, excl. beoordeling, AATCC 16.3 option 1
Lichtechtheid, Windows B/SL, lage RV, Black standard, prijs per uur, excl. beoordeling, AATCC 16.3 option 2
Lichtechtheid, Windows B/SL, lage RV, Black panel, prijs per uur, excl. beoordeling, AATCC 16.3 option 3
Lichtechtheid, gecombineerd met zweet oplossing ISO 105 B07
Lichtechtheid, Daylight Q, Irr.=0,51 Blackstandard 65°C, 102min dry, 18min water spray ISO 4892-2 methode A, cycle B1
Lichtechtheid, Window Q, Irr.=1,10 Blackstandard 65°C, continuously dry ISO 4892-2 methode B, cycle B2
Lichtechtheid, Window Q, Irr.=1,10 Blackstandard 100°C, continuously dry ISO 4892-2 methode B, cycle B3
Lichtechtheid, Daylight Q, Irr.=0,51 Blackpannel 63°C, 102min dry, 18min water spray ISO 4892-2 methode A, cycle B4
Lichtechtheid, Daylight Q, Irr.=0,51 Blackpannel 83°C, 102min dry, 18min water spray ISO 4892-2 methode A, cycle B5
Lichtechtheid, Daylight Q, Irr.=0,51 Blackpannel 89°C, 102min dry, 18min water spray ISO 4892-2 methode A, cycle B6
Lichtechtheid, Window Q, Irr.=1,10 Blackpannel 63°C, continuously dry ISO 4892-2 methode B, cycle B7
Lichtechtheid, Window Q, Irr.=1,10 Blackpannel 89°C, continuously dry ISO 4892-2 methode B, cycle B8
Beoordeling van ISO 4892-2 samples Grijs schaal methode ISO105-A02 ISO 4582
Beoordeling van ISO 4892-2 samples Kleurmeter ISO 7724 ISO 4582
Lichtechtheid, Daylight Q, Blackpannel Insulated 65°C, Continuous RUN, 102min dry, 18min water spray ISO 11341 methode 1, cycle A
Lichtechtheid, Daylight Q, Blackpannel Insulated 65°C, Discontinuous RUN, 102min dry, 18min water spray ISO 11341 methode 1, cycle B
Lichtechtheid, Daylight Q, Blackpannel Insulated 65°C, Continuous RUN, Continuously dry ISO 11341 methode 1, cycle C
Lichtechtheid, Daylight Q, Blackpannel Insulated 65°C, Discontinuous RUN, Continuously dry ISO 11341 methode 1, cycle D
Lichtechtheid, Window Q, Blackpannel Insulated 65°C, Continuous RUN, 102min dry, 18min water spray ISO 11341 methode 2, cycle A
Lichtechtheid, Window Q, Blackpannel Insulated 65°C, Discontinuous RUN, 102min dry, 18min water spray ISO 11341 methode 2, cycle B
Lichtechtheid, Window Q, Blackpannel Insulated 65°C, Continuous RUN, Continuously dry ISO 11341 methode 2, cycle C
Lichtechtheid, Window Q, Blackpannel Insulated 65°C, Discontinuous RUN, Continuously dry ISO 11341 methode 2, cycle D
Lichtechtheid, Daylight Q, Blackpannel Insulated 77°C±3, Continuous RUN, 90min dry, 30min light and water spray, 70%RH±5 AATCC 169 option 1
Lichtechtheid, Daylight Q, Blackpannel Insulated 77°C±3, Continuous RUN, 60min dry, 60min no light and no water spray, 70%RH±5 AATCC 169 option 2
Lichtechtheid, Daylight Q, Blackpannel Insulated 77°C±3, Continuous RUN, 120min dry, 27%RH±5 AATCC 169 option 3
Lichtechtheid, Daylight Q, Blackpannel Insulated 63°C±3, Continuous RUN, 102min dry, 18min light and water spray, 50%RH±5 AATCC 169 option 4
Lichtechtheid, Daylight Q, Blackpannel Uninsulated 63°C, 102min dry, 18min water spray ASTM G155 cycle 1
Lichtechtheid, Extended UV- Q/B, Blackpannel Uninsulated 89°C, Light 228min, donker 60min SAE J2412
Lichtechtheid, coated textile speciale omstandigheden prijs per uur vanaf EN 12280-2
Lichtechtheid, Paints and varnishes Daylight Q, Irr.=0,51 Blackstandard 65°C, 102min dry, 18min water spray ISO 16474-2 Methode A cycle 1
Lichtechtheid, Paints and varnishes Daylight Q, Irr.=1,10 Blackstandard 65°C, continius dry ISO 16474-2 Methode B cycle 2
Lichtechtheid, Paints and varnishes Daylight Q, Irr.=1,10 Blackstandard 100°C, continius dry ISO 16474-2 Methode B cycle 3
Lichtechtheid, Graphic technology, Prints and Printing inks Assement of light fastness using filtered xenon arc light ISO 12040
Slipweerstand
Slipweerstand van vloersystemen classificatie R9,R10,R11,R12,R13 DIN 51130
Classificatie V4, V6, V8, of V10 DIN 51130
BGR 181 vloersystemen slipweerstand classificatie R9,R10,R11,R12,R13 en V4, V6, V8, of V10 DIN 51130
Slipweerstand van vloersystemen classificatie A, B en C Din 51097
Slipweerstand in natte ruimtes (frankrijk) Afgeleide van de DIN 51130+51067 XPP-05-010
Slipweerstand van vloersystemen dmv GMG 100 DIN 51131
Slipweerstand platen van natuursteen voor buitenbestrating DIN EN 1341 bijlage E
Oppervlak-eigenschappen van weg- en vliegveldverhardingen EN 13036-4
Polyvinylchloride vloerbedekkingen met verhoogde slipweerstand EN 13845
Stick slip test VDA230-206
Pendulum test BS 7976-2
Pendulum test BS 13036-4
Pendulum DCOF test EN 13036-4
Pendulum DCOF test HB 198/AS 4586
Pendulum DCOF test HB 198/AS 4663
Pendulum DCOF test CTIOA
Pendulum DCOF test TS 15676
Pendulum DCOF test EN 14231
Slip test aka DCOF AcuTest DCOF Rating Test ANSI A137.1
Slip test aka DCOF AcuTest DCOF Rating Test ANSI A326.3
DCOF Test ANSI B101.3
SCOF Test ASTM C 1028-07
Road skid test ASTM E 303-93
SCOF Test ANSI B101.1
DCOF Test Tortus Floor Friction Digital Tribometer
Geluid metingen
Materials for acoustical applications. Determination of airflow resistance DIN EN 29053 / ISO 9053
Determination of sound absorption coefficient and impedance in impedance tubes EN 10534-2
Measurement of sound absorption in a reverberation room ISO 354 / ISO 11654
Determination of the sound absorption coefficient in situ in the sence of DIN  CEN/TS 1793-5 DIN ISO 13472-1
Derermination of the airborne sound insulation of building elements in the aiborne sound transmissions suite with suppresse flanking transmission DIN EN ISO 140-3 717-1
Determination of the inpact sound reduction of floorings in the seiling test rig acc. DIN EN ISO 140-8 717-2
Determination of the airflow resistivity or the specific airflow resistance acc. ISO 29053 / ISO 9053
Derermination of the dynamic stiffness acc. To DIN EN 29052-1 / ISO 9052-1
Determination of the gross density of open porous materials acc. To DIN 51913
Determination of the porosity and the accessible void content, respectively in the sense of ASTM incl determination of the gross density of open porous materials aac to DIN ASTM D2856 / DIN 51913
Determination of the elastic modulus acc. to DIN EN ISO 6721-3 6721-4 6721-5
Determination of the shear modulus acc. To DIN EN ISO 6721-6
Determination of the torsional modulus acc. To DIN EN ISO 6721-2
Determination of the loss factor as a function of temperature acc. To DIN EN ISO 6721 DIN 53440 JIS G 0602
Determination of the structure-borne reverberation time in the sense of DIN, Determination of the loss factor acc. To EN DIN 45635-8 DIN EN 12354-1
Materials for acoustical applications. Determination of airflow resistance EN 29053 ISO 9053
Determination of sound absorption coefficient and impedance in impedance tubes EN 10534-2
Measurement of sound absorption in a reverberation room ISO 354 / ISO 11654
Corrosion
Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) ASTM B117
Voluntary Specification, Performance Requirements and Test Procedures for High Performance Organic Coatings on Aluminum Extrustions and Panels ASTM D1654
Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus ASTM D1735
Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity ASTM D2247
Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal ASTM D2803
Standard Guide for Testing Coating Powders and Powder Coatings ASTM D3451
Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation ASTM D4585
Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet) ASTM D5894
Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel ASTM D6675
Standard Practice for Modified Salt Spray (Fog) Testing ASTM G85
Salt Spray Resistance Test for Painted Panels and Parts  Ford FLTM BI 103-01
Water Immersion Test for Painted Parts and Panels Ford FLTM BI 104-01
Condensing Water Vapor Test Ford FLTM BI 104-02
Salt Spray Test GM 4298P
Water Fog Humidity Test GM 4465P
Paints and Varnishes- Determination of resistance to neutral salt spray (fog)  ISO 7253
Corrosion Tests in Artificial Atmospheres - Salt Spray Tests ISO 9227
Corrosion Preventive Compound, Underbody Vehicle Corrosion Protection SAE J1959
Corrosion resistance Footwear metallic Accessoiries EN ISO 22775
Diverse
Peel test medical bags. EN 868-5 part D
Meerprijs per 4 extra metingen per zak inzake bovenstaande EN 868-5 part D
Waterabsorberend vermogen 2 metingen DIN 53923
Waterabsorberend vermogen 10 metingen ISO 20158
Test procedure for comparative examination of cleanable filter media VDI 3926
Veiligheidseisen en beproevingsmethode voor kinderslaapzakken tot einde van 2015 BS 8510
Veiligheidseisen en beproevingsmethode voor kinderslaapzakken EN 16781:2014
Veiligheidseisen en beproevingsmethode voor kinderdekbedden (geen dekbedovertrek) EN 16779:2014
Veiligheidseisen en beproevingsmethode voor stootkussen voor kinderledikanten EN 16780:2014
Determination of resistance to combined shear flexing and rubbing (Rubber- or plastics-coated fabrics) ISO 5981
Vuil afstotendheid AATCC 130
Emisivity test EN 15976:2011
Emisivity test incl 500 uur UVB veroudering EN 15976:2011
Emisivity test (thermal emittance) ASTM C 1371
Static and Kinetic Coefficients of friction  ASTM D 1894
PDPA laser measurements for spray characterisation, droplet size PDPA laser
Assessment of the resistance of coatings to pressure water-jetting ISO 16925 methode A
Assessment of the resistance of coatings to pressure water-jetting ISO 16925 methode B
Assessment of the resistance of coatings to pressure water-jetting ISO 16925 methode C
Circulair textiel NTA 8195
Filter VDI 3926
Friction / Wrijvingscoëfficient
Determination of the static and dynamic coefficient of friction eerste staal EN 14882
Determination of the static and dynamic coefficient of friction ieder volgende EN 14882
Determination of the coefficients of friction (rubber of kunstof bekleede weefsels) ISO 14882
Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting ASTM D1894
Determination of the coefficients of friction (film and sheeting) ISO 8295
Determination of the coefficients of friction (film and sheeting) dry ISO 8295
Determination of the coefficients of friction (film and sheeting) wet ISO 8295
Transport Pallet
Bending tests ISO 8611
Fork lifting tests ISO 8611
Compression tests on blocks ISO 8611
Stacking test Setup top & bottom ISO 8611
Bottom deck bending tests ISO 8611
Statische buigtest wing pallet  ISO 8611
Statische buigtest met airbag  ISO 8611
Hoekval  ISO 8611
Static shear test  ISO 8611
Dekbedden
Dikte,afmetingen en massa
Model, wijze van confectioneren TLM
Areïke massa vulling synthetisch dekbed ISO 3801
Afmetingen, massa en dikte TLM
Gewicht, totaal dekbed TLM
Dikte, enkel bed TLM
Dikte, all-season bed TLM
Vulgewicht dekbed TLM
Vulgewicht kussen TLM
Theoretisch vulgewicht TLM
Vulsel samenstelling
Microscopisch onderzoek (synth.) TLM
Microscopisch onderzoek gans/eend TLM
Aanduiding van Klasse 1,2 of 3 (allen in combinatie met EN 12131 EN 12934
Handscheiding. (% dons en veren)  EN 12131
Kwalitatieve bepaling van dons. Afkomstig van: Kip, eend etc. EN 12131
Kwalitatieve bepaling van dons en veren. Afkomstig van: Kip, eend etc. EN 12131
Handscheiding. (% dons en veren)  IDFB
Handscheiding. (% dons en veren)  ASTM D4524
Handscheiding. (% dons en veren)  GB/T 14272
Handscheiding. (% dons en veren)  JIS L1903
Dons en veren bepaling van zuurstof gehalte EN 1162
Dons en veren bepaling van zuurstof gehalte IDFB testing regulations Part 07
Dons en veren Bepaling van de troebelheid van een waterig extract EN 1164
Dons en veren Bepaling van de Troebelheid met automatische NTU-meter  IDFB testing regulations Part 11-A
Dons en veren bepaling van vul gewicht EN 12130
Dons en veren Volumemeting (vulkracht - met stoombehandeling)  IDFB testing regulations Part 10-B
Diverse bepalingen
Vulkracht, los materiaal IDFB deel 10
Vulkracht, materiaal uit dekbed IDFB deel 10
Reinigen 1-persoonsdekbed TLM
Determination of down and/or feather penetration(**) EN 12132-1